FEATURES :

Universal Testing Machines have a wide range of applications and number of materials, metais in different form and shapes can be tested for variety of tests like Tension, Compression, Transverse, Bend, Shear, Brinell Hardness etc. Special attachments are also available for testing of Flat Belts, Chain Links, Wire Ropes etc.

LOADING FRAME:

The base has a hydraulic cylinder at its center and two main screws at both ends. The middle cross head is mounted on screws through main
nuts. The middle cross head can be moved up or down through chain transmission and geared motor to adjust the initial tensile/compression
clearance. nside base of machine, hydraulic cylinder is sested in which piston is placed on the piston, rests an assembly of upper, lower cross
head and two columns. The individually lapped cylinder piston assembly ensures smooth axial force with minimum friction.

CONTROL PANEL:

Hydraulic circuit it consists of hydraulic power pack which has a directly driven radial plunger pump which gives continuous non pulsating flow of oil pressure up to 250bar a pressure compensated needle type flow control valve is obtained with help of valves. Optionally this can be controlled form electronic system

LOADING RATE/STRAINING RATE CONTROL:

This is superfine controlling system which controls loading rate / straining rate as per commands from electronic machine control system. FINE UTM Software can send loading rate / straining rate to electronic system for fully automatic testing.

LOAD MEASUREMENT SYSTEM:

: The oil pressure in the main cylinder is also transferred to an electronic pressure transducer which gives proportionate signal to electronic unit. Both the motors for hydraulic operation and cross head motion are controlled by buttons on electronic control system and they have interlocked to prevent simultaneous working of motors. The electrical panel is housed in control panel. Displacement measurement is carried out by means of a rack and pinion on rotary encoder. Encoder signal is fed to electronic system to get displacement

OPERATION:

Tension test is conducted by gripping the test specimen in the upper and middle cross head. Compression, Bending, Transverse, Shear and Hardness tests are conducted between the middle and lower cross head by using appropriate fixtures. The rapid adjustment of middle crosshead facilitates easy fixing of tensile / Compression specimens of different lengths.Hydraulic controls are through hand operated valve, ergonomically placed for ease of control. Optionally valves can be controlled form electronic control system. Adequate safeties for over load and over travel are incorporated and emergency switch is provided.

ACCURACY & CALIBRATION:

Every machine is calibrated in accordance with procedure laid down in BS-1610-1964 IS 1828-1991. FMI Computerised Universal Testing Machines comply with grade A of BS 1610-1964 and Grade 1.0 of IS 1828-1991. An accuracy of ± 1% guaranteed from 2% to 100% of capacity of the machine. In the computerised UTM, the computer is an integral part of the entire system and not just on ADD ON feature. This puts a lot of power and versatility into the hands of the operator and makes the system much more self contained than usual, as it includes many functions usually only available as additional (often expensive) optional features